WMP系列橡胶.塑料机械配套 水循环模温机
WMP SERIES RUBBER, PLASTIC WATER CIRCULATION TEMP. CONTROLLER
型 号 ： WMP系列
Model: WMP series
类 型 ： 橡胶(塑料)机械温度控制
Type: Temp. controller for rubber and plastic machine
>>应用范围
冷喂料橡胶挤出机、销钉式冷喂料橡胶挤出机、双复合橡胶挤出机组、复合胎面挤出机组、轮胎部件生产线、电缆设备生产线、塑料管材/型材挤出设备、螺杆式塑料挤出机、挤出机喷淋冷却槽控温、辊轮(筒)控温及其它需精确控温之场合
Applicatioin range: precise temperature control for cold feed rubber extruder,pin cold feed rubber extruder, double composite rubber extruder unit, duplex tread extruding machine set, production line for tyre parts, production line for cables, extrusion machinery for plastic pipes/extruded materials, plastic screw extruder, extruder spray-cooling bath, roller(roll barrel), etc.
>>机型特点
● 最高使用温度120℃（另有140℃机型）Maximum function temperature: 120oC (Model with a temperature of 140oC is acceptable)
● 自动冷却关机功能Automatic cooling shutdown function (WMP Series)
● 微电脑触摸式面板，操作简单 Easy operation with micro computer touch-type panel
● 开机自动排气功能.Automatic exhaust function as starting up the machine
● 采用格兰富（GRUNDFOS）立式多级离心泵浦Use GRUNDFOS brand of multiple centrifugal pump with vertical axis
● 出水、回水温度显示Temperature indication of output and input water
● OMRON、FUJI控制零件 Controlling parts of OMRON and FUJI brands
● 管路防爆装置（安全阀）Explosion-proof apparatus
● 冷却能力超强，可选用间接冷却或直接冷却
Powerful cooling functions with two options (indirect cooling or direct cooling)
● 故障显示，维修不用专业人员Fault indication which allows maintenance without professional maintainer
>>安全保护系统 Safety system
● 总电源过电流无熔丝断路器 Circuit breaker
● 异常警告指示灯系统 Alarm system
● 马达反转保护及指示灯 motor rollback protective lamp
● 异常警告蜂鸣器 Alarm sounding
● 缺水保护及指示灯Water lack protective lamp
● 保温隔热处理 Insulation heating system
● 过热保护及指示灯 over-heat protective
● 回油温度显示表Oil reture display
● 循环泵浦过载保护及指示灯Circuiting pump overload protective lamp
● 电源欠相保护 Power protection
● By-Pass油压回路 By-pass hydrauic circuit
>>通信功能(选购) Communication functions (optional)
● RS-485、RS-232C通信 Communication of RS-485 and RS-232c
● 远程开/关机控制（安全模拟信号）.Remote boot-strap and shut-down control (safe analog signals)
● 连接PLC扩展模块控制 Connect with PLC scalable module control
● 模温机组联动控制（安全模拟信号）.Linkage control of the mold temperature controller set (safe analog signals)
● Devicenet 通信总线 Communication trunk of Device net
集成故障警报输出（安全模拟信号）Alarm output for an integrated failure (safe analog signals)
● 外接温度传感器（PT100.K型、J型） Temperature sensor of external connection (Model of PT100.K and J)
● 总电源电缆配置CEE插座及插头General feed cable equipped with CEE sockets and plugs
>>产品参数
全系列模温机采用GRUNDFOS（格兰富）CR系列120℃热水泵浦。
可根据客户要求,设计制造您所需求的模温机（温控机）系统!
Special design upon request.
